What is Canon Pixma Error Codes 5100, 6000

Carriage error or Error Code 5100
Condition: An error occurred in the carriage encoder signal.
Solutions:

• Smearing or scratches on the carriage slit film
• - clean the timing slit film.
• Foreign material or paper debris that obstructs the carriage movement;
• - remove foreign material.
• Ink tank conditions;

Line Feed error or Error Code 6000
Condition: An error occurred in the LF encoder signal.
Solutions:

• Smearing or scratches on the LF / EJ slit film
• - clean the LF / EJ slit film.
• Foreign material or paper debris in the LF drive;
• - remove foreign material.

Read More...

Call Us +1-855-517-2433 (Toll Free)

Canon Printer Error Code

Procedure to reset Printer canon MP140, MP 145and Canon MP160 with Error Code Message for Printer Canon MP140, MP145 and Canon MP160, you can find error code message the end of this post:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.

2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button

3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
 
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
Error Code :
 
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
Read More...

Call Us +1-855-517-2433 (Toll Free)

How to resolve error 5100 on an MG4120

Error 5100

There are several reasons for error 5100 to appear. This article provides you recommendations with links to clear the message.

To clear the error, click on the link to open the article and get detailed instructions. See More ( )

Request for service

CALL US +1-855-517-2433 (TOLL FREE)

How to resolve error 5100 on an MG4120

Error 5100

There are several reasons for error 5100 to appear. This article provides you recommendations with links to clear the message.

To clear the error, click on the link to open the article and get detailed instructions. See More ( )

Request for service

CALL US +1-855-517-2433 (TOLL FREE)