Thursday 3 May 2012

how to Install the print head in canon Printer


Install the print head by following the procedure below.


1. Open the paper support and paper output slot cover of the printer.

1. Paper Support
2. Paper Output Slot Cover

 Power the printer on.

Power Button

 Open the print head cover. The print head holder moves to the center.

1. Print Head Cover
2. Print Head Holder

 Pinch and lift the print head lock lever at the front of the print head holder.

1. Print Head Lock Lever

  Remove the print head from its package and remove the orange protective cap that covers the bottom of the print head.

1. Protective Cap
2. Print Head Face

Insert the print head into the print head holder so that the "^" mark faces the "V" mark.

1. Print Head Arrow
2. Ink Supply Filter

Lower and close the print head lock lever fully until you hear a click.

1.Print Head Lock Lever

Next, set the ink tanks.

Remove the black ink tank (BCI-15 Black) from its package. Hold the ink tank as shown in the illustration, and remove the orange protective cap, while lifting in the direction of the arrow.

1. Black Ink Tank (BCI-15 Black)
2. Protective Cap
3.Ink Outlet

Set the Black ink tank at an angle in the back so that the ">" mark on the ink tank faces the "<" mark on the print head lock lever.

1.Ink Tank and Print Head Lock Lever Marks

 Press down on the <PUSH> mark on the ink tank until you hear a click.

1.PUSH> Mark

 Insert the color ink tank (BCI-16 Color) in the same way.

1.Color Ink Tank (BCI-16 Color)
2. <PUSH> Mark


. Close the print head cover. The print head moves to the right.

1. Print Head Cover
Read More...

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

No comments:

Post a Comment

Note: only a member of this blog may post a comment.